欢迎光临上海承盛电子科技有限公司
您当前的位置:首页 > 技术优势 >
2021/3/14
RF Performance

The characteristic impedance is complex and contains both resistance and reactance and is independent of length and frequency. The
characteristic impedance at high frequencies is defined by the voltage value of a single wave divided by the current value of a single
wave.
Since theinductance and capacitance are essentially independent of frequency in the “high” frequency range, in terms of inductance
and capacitance, characteristic impedance is the square root of the inductance per unit length (L) divided by the capacitance per unit
length (C).

Z= √L/C

L is determined by the ratio R/r 
C is determined by the ratio R/r and ε 
Where: r = Inside diameter of the shielding conductor
             R = Outside diameter of the signal conductor
             ε = Dielectric constant 

As the spacing between R and r increases, in general, the inductance increases while the capacitance decreases. Therefore, the
characteristic impedance will decrease as the distance between the signal conductor and shielding tube decrease and increase when
this distance increases.